Methods of printing:-Perrotine printing



Methods of printing

A perrotine printing machine



The perrotine is a block-printing machine invented by Perrot of Rouen in 1834, and practically speaking is the only successful mechanical device ever introduced for this purpose. For some reason or other it has rarely been used in England, but its value was almost immediately recognized on the Continent, and although block printing of all sorts has been replaced to such an enormous extent by roller printing, the perrotine is still largely employed in French, German and Italian works.

Operation

The machines mode of action is roughly as follows: Three large blocks (3 ft. long by 3 to 5 in. wide), with the pattern cut or cast on them in relief, are brought to bear successively on the three faces of a specially constructed printing table over which the cloth passes (together with its backing of printers blanket) after each impression.
The faces of the table are arranged at right angles to each other, and the blocks work in slides similarly placed, so that their engraved faces are perfectly parallel to the tables. Each block is moreover provided with its own particular colour trough, distributing brush, and woolen colour pad or sieve, and is supplied automatically with colour by these appliances during the whole time that the machine is in motion. The first effect of starting the machine is to cause the colour sieves, which have a reciprocating motion, to pass over, and receive a charge of colour from, the rollers, fixed to revolve, in the colour troughs. They then return to their original position between the tables and the printing blocks, coming in contact on the way with the distributing brushes, which spread the colour evenly over their entire surfaces.
At this point the blocks advance and are gently pressed twice against the colour pads (or sieves) which then retreat once more towards the colour troughs. During this last movement the cloth to be printed is drawn forward over the first table, and, immediately the colour pads are sufficiently out of the way, the block advances and, with some force, stamps the first impression on it. The second block is now put into gear and the foregoing operations are repeated for both blocks, the cloth advancing, after each impression, a distance exactly equal to the width of the blocks. After the second block has made its impression the third comes into play in precisely the same way, so that as the cloth leaves the machines it's fully printed in three separate colours, each fitting into its proper place and completing the pattern. If necessary the forward movement of the cloth can be arrested without in any way interfering with the motion of the block, an arrangement which allows any insufficiently printed impression to be repeated in exactly the same place with a precision practically impossible in hand printing.

Usage

For certain classes of work the perrotine possesses great advantages over the hand-block; for not only is the rate of production greatly increased, but the joining up of the various impressions to each other is much more exacting; in fact, as a rule, no sign of a break in continuity of line can be noticed in well-executed work. On the other hand, however, the perrotine can only be applied to the production of patterns containing not more than three colours nor exceeding five inches in vertical repeat, whereas hand block printing can cope with patterns of almost any scale and continuing any number of colours. All things considered, therefore, the two processes cannot be compared on the same basis: the perrotine is best for work of a utilitarian character and the hand-block for decorative work in which the design only repeats every 15 to 20 in. and contains colours varying in number from one to a dozen.

Comments

Post a Comment

Popular posts from this blog

Methods of printing:-Stencil printing,Digital textile printing,Calico printing

Image
Stencil printing The art of stenciling on textile fabrics has been practised from time immemorial by the Japanese, and found increasing employment in Europe for certain classes of decorative work on woven goods during the late 19th century. A pattern is cut from a sheet of stout paper or thin metal with a sharp-pointed knife, the uncut portions representing the part that will be left uncoloured. The sheet is laid on the fabric and colour is brushed through its interstices. The peculiarity of stenciled patterns is that they have to be held together by ties. For instance, a complete circle cannot be cut without its centre dropping out, so its outline has to be interrupted at convenient points by ties or uncut portions. This limitation influences the design. For single-colour work a stenciling machine was patented in 1894 by S. H. Sharp. It consists of an endless stencil plate of thin sheet steel that passes continuously over a revolving cast iron cylinder. The cloth to ...
Read more

Basic Garment Shapes of Menswear

Image
Basic Garment Shapes of Menswear Throughout the fashion history of menswear, especially in men’s tailor-made clothing, there have always been fewer silhouette choices. The majority of menswear includes the following four basic shapes: rectangular/ inverted/ triangle/ square and natural Body Shape For Men – TRIANGLE Most men are predisposed to being larger around the waist and hips in relation to the top part of their bodies, especially as they get older. This creates a natural triangular shape with the base at the waist and the tip at the face. Having a triangular body shape does not mean you are in bad shape but it presents a challenge in finding clothes that make your entire body appear proportional. Most men's clothing is designed with the opposite effect in mind – broad on top and narrower at the waist. Creating  balance  and  shape  with your clothes is a key consideration for you. Clothing For Men With Triangular Body Shape: Tailored pattern...
Read more